Replies: 3 comments 1 reply
-
|
I bet that they are willing to collaborate on manufacturing to make a customized model for Nabu Casa as part of some kind of partnership. https://partner.home-assistant.io/ https://www.home-assistant.io/blog/2022/07/12/partner-program/ PS: Reading RK3328 SoC (Rockchip RK3300 family) specification it should support 4GB RAM, but they only list 1GB and 2GB models today: https://www.dusuniot.com/product/dsgw-210-rk3328-iot-gateway-hub-controller-bridge-hardware/ |
Beta Was this translation helpful? Give feedback.
-
|
Do you have any idea on how we can upgrade the firmware of the Zigbee part. Looks like they are running 6.7.10.0 build 423 |
Beta Was this translation helpful? Give feedback.
-
|
Sorry no, but there is a longer discussion thread here with more links -> https://community.home-assistant.io/t/dusun-dsgw-210-ha-zigbee-thread-z-wave-and-ble-gateway-appliance-pre-installed-with-home-assistant-operating-system/593416/ Last I heard anything new from Dusun IoT was in this article on CNX Software which mentioned that Dusun IoT was working on replacing its Google Docs-based documentation with a proper online wiki and GitHub repos. That article might still be a good read: They also have some videos on their YouTube channel, see example: https://www.youtube.com/watch?v=56eQZsUJOSw But that does not yet to be the case look that they changes their ways as their wiki still link to Google Docs: and their GitHub account does not look to be active: Most of their support still looks to be done via their online community: https://community.dusuniot.com/ You could also try sening a direct message to thier company representivie that has a registered Home Assistant community account here (but has not been active there in a couple of years) -> https://community.home-assistant.io/u/dusun_iot/summary Anyway, if it is has the standard Silabs bootloader and running Linux with shell access then I assume you could probably flash it with Nabu Casa's universal-silabs-flasher: But be careful since you risk bricking it if the firmware image build so not have the correct pin mappings, see silabs firmware builder: PS: If you have a model that is already running Home Assistant Operating System then you can install the "Advanced SSH & Web Terminal" community add-on (from HACS) which allow you to log in to Home Assistant instance using SSH or by using the Web Terminal.: |
Beta Was this translation helpful? Give feedback.
-
|
FYI, just stumbled on several other slighty newer models of applicances from @dusuniot preloaded with Home Assistant Operating System: Dunsun DSGW-120 / DSGW-120V2 (based on Rockchip PX30) looks to be an all-in-one smart home control panel:
Dunsun DSGW-290 (based on Rockchip RK3568) looks to be custom appliance with onboard IoT radios and a 4G LTE SIM card slot: They also updated their HA OS image for the Dunsun DSGW-290 model to include Frigate NVR with Local AI Object Detection on RK3568: Not seeing any activity on their @dusuniot GitHub account though so do not know if they are contributing back to upstream in any way? Llian Li at Dunsun) also have an inactive company account in the Home Assistant community forum: PS: Again, if anyone have any contacts at the Dusun company then maybe suggest to them to at the very least try to follow Sonoff/ITead/Coolkit/eWeLink’s development approach for Sonoff iHost for the better option of porting Home Assistant Operating System in a standardized way to this hardware and publish all of the projects/code/libraries publicly on GitHub to better try to follow the spirit of open-source software and community etos: |
Beta Was this translation helpful? Give feedback.
Uh oh!
There was an error while loading. Please reload this page.
Uh oh!
There was an error while loading. Please reload this page.
-
Linking to discussion thread in Home Assistant community forum about "Dusun DSGW-210-HA”, a hardware appliance that ships with Debian for ARM64 and Home Assistant Supervised pre-installed, so question is if it could run Home Assistant Operating System instead?
https://community.home-assistant.io/t/dusun-dsgw-210-ha-gateway-zigbee-and-z-wave-to-ethernet-wifi-appliance-pre-installed-with-home-assistant/593416
If this is good hardware maybe Nabu Casa could rebrand it as “Home Assistant Yellow Lite” as a low-cost entry model for beginners? 😉
They an /ODM so also look to make a generic model for OEM rebranding called Dunsun DSGW-230 which features PoE (Power-over-Ethernet):
https://www.dusuniot.com/product/dsgw-230-gigabit-poe-gateway-ceiling-mountable/
All DSGW-210 and DSGW-230 models looks to be based on Rockchip RK3328 SoC so thinking it should perform better than ASUS Tinker Board S as has somewhat similar specifications. (Seeing in some general tests that RK3328 was a little more 30% faster compared to RK3288 when both SoCs were set to run at 1.5GHz).
Product links and documentation:
FCC report:
Videos:
Note that the DSGW-210 series from DusunIoT does not seem to be meant to be sold directly to end-users as-is and is instead designed to be sold as a white-label product for rebranding so it is meant to be bought by a company and customized before resold under a new logo.
They have several different model variants of Dusun DSGW-210 with different radios and other specifications. This specific DSGW-210-HA” model ships with EFR32MG21 radio module for Zigbee/Thread + ZGM130S Z-Wave 700 series and EFR32BG22 for Bluetooth BLE radios.
Apparently, Andrew Howe from The Smarthome Book did test an older pre-production sample of this product for pre-review more than a year ago (29/04/2022), though seeing as the product at that time actually did not look to have been properly launched and advertised until more recently we can perhaps assume that his test was a little outdated, especially how much the installation process of Home Assistant itself has matured a lot since, but he did summarize his review with a comment that "this product is probably suitable for business to business, and not business to consumer".
I can currently only find the "Dusun DSGW-210-HA” model for wholesale directly from Dusun/Roombanker on Alibaba (not Aliexpress) which is really meant for distributors for resellers or those wanting to customize logo and packaging for rebranding. See these two links:
https://www.alibaba.com/product-detail/Dusun-Open-API-Smart-Home-Gateway_1600274606083.html
https://www.alibaba.com/product-detail/Dusun-Smart-Home-Raspberry-Pi-Grow_1600273967614.html
PS: FYI, looks like the Jeedom SAS team has rebranded a slightly different model of Dusun DSGW-210 or Dusun DSGW-230 and is reselling it as “Jeedom Luna”:
Beta Was this translation helpful? Give feedback.
All reactions