Add arduino-ics library

[iory]

Library for Kondo ICS servo motors with Arduino and ESP32 support.

[github-actions]

❌ ERROR: Arduino Lint found errors with https://github.com/iory/arduino-ics:

Linting library in arduino-ics
INFO: No header file found matching library name (arduino-ics.h). Best practices are for primary header filename to     
      match library name.                                                                                               
      See: https://arduino.github.io/arduino-cli/latest/library-specification/#libraryproperties-file-format            
      (Rule LS008)                                                                                                      
ERROR: Library name arduino-ics starts with "Arduino". These names are reserved for official libraries.      
       See: https://arduino.github.io/arduino-cli/latest/library-specification/#libraryproperties-file-format
       (Rule LP012)                                                                                          
WARNING: No example sketches found. Please provide examples.                                      
         See: https://arduino.github.io/arduino-cli/latest/library-specification/#library-examples
         (Rule LD004)                                                                             

Linter results for project: 1 ERRORS, 1 WARNINGS

-------------------

[github-actions]

Thanks for your interest in contributing to the Arduino Library Manager index @iory
Please resolve the error(s) mentioned in the previous comment.

After resolving the issue, trigger this check again by doing one of the following:

• Commit the required change to the branch you submitted this pull request from.
• Comment here, mentioning @ArduinoBot in the comment.

❗ NOTE: It is not necessary to open a new pull request. ❗

More information:
https://github.com/arduino/library-registry/blob/main/README.md#if-the-problem-is-with-the-pull-request

[github-actions]

❌ ERROR: Arduino Lint found errors with https://github.com/iory/arduino-ics:

Linting library in arduino-ics
INFO: No header file found matching library name (arduino-ics.h). Best practices are for primary header filename to     
      match library name.                                                                                               
      See: https://arduino.github.io/arduino-cli/latest/library-specification/#libraryproperties-file-format            
      (Rule LS008)                                                                                                      
ERROR: Library name arduino-ics starts with "Arduino". These names are reserved for official libraries.      
       See: https://arduino.github.io/arduino-cli/latest/library-specification/#libraryproperties-file-format
       (Rule LP012)                                                                                          
WARNING: No example sketches found. Please provide examples.                                      
         See: https://arduino.github.io/arduino-cli/latest/library-specification/#library-examples
         (Rule LD004)                                                                             

Linter results for project: 1 ERRORS, 1 WARNINGS

-------------------

[github-actions]

Thanks for your interest in contributing to the Arduino Library Manager index @iory
Please resolve the error(s) mentioned in the previous comment.

After resolving the issue, trigger this check again by doing one of the following:

• Commit the required change to the branch you submitted this pull request from.
• Comment here, mentioning @ArduinoBot in the comment.

❗ NOTE: It is not necessary to open a new pull request. ❗

More information:
https://github.com/arduino/library-registry/blob/main/README.md#if-the-problem-is-with-the-pull-request

[iory]

@ArduinoBot Fixed commit

[github-actions]

Hello! I'm checking your submission again.

[github-actions]

❌ ERROR: Arduino Lint found errors with https://github.com/iory/arduino-ics:

Linting library in arduino-ics
INFO: No header file found matching library name (arduino-ics.h). Best practices are for primary header filename to     
      match library name.                                                                                               
      See: https://arduino.github.io/arduino-cli/latest/library-specification/#libraryproperties-file-format            
      (Rule LS008)                                                                                                      
ERROR: Library name arduino-ics starts with "Arduino". These names are reserved for official libraries.      
       See: https://arduino.github.io/arduino-cli/latest/library-specification/#libraryproperties-file-format
       (Rule LP012)                                                                                          
WARNING: No example sketches found. Please provide examples.                                      
         See: https://arduino.github.io/arduino-cli/latest/library-specification/#library-examples
         (Rule LD004)                                                                             

Linter results for project: 1 ERRORS, 1 WARNINGS

-------------------

[github-actions]

Thanks for your interest in contributing to the Arduino Library Manager index @iory
Please resolve the error(s) mentioned in the previous comment.

After resolving the issue, trigger this check again by doing one of the following:

• Commit the required change to the branch you submitted this pull request from.
• Comment here, mentioning @ArduinoBot in the comment.

❗ NOTE: It is not necessary to open a new pull request. ❗

More information:
https://github.com/arduino/library-registry/blob/main/README.md#if-the-problem-is-with-the-pull-request

[iory]

@ArduinoBot Fixed commit

[github-actions]

Hello! I'm checking your submission again.

[github-actions]

❌ ERROR: Arduino Lint found errors with https://github.com/iory/arduino-ics:

Linting library in arduino-ics
INFO: No header file found matching library name (arduino-ics.h). Best practices are for primary header filename to     
      match library name.                                                                                               
      See: https://arduino.github.io/arduino-cli/latest/library-specification/#libraryproperties-file-format            
      (Rule LS008)                                                                                                      
ERROR: Library name arduino-ics starts with "Arduino". These names are reserved for official libraries.      
       See: https://arduino.github.io/arduino-cli/latest/library-specification/#libraryproperties-file-format
       (Rule LP012)                                                                                          
WARNING: No example sketches found. Please provide examples.                                      
         See: https://arduino.github.io/arduino-cli/latest/library-specification/#library-examples
         (Rule LD004)                                                                             

Linter results for project: 1 ERRORS, 1 WARNINGS

-------------------

[github-actions]

Thanks for your interest in contributing to the Arduino Library Manager index @iory
Please resolve the error(s) mentioned in the previous comment.

After resolving the issue, trigger this check again by doing one of the following:

• Commit the required change to the branch you submitted this pull request from.
• Comment here, mentioning @ArduinoBot in the comment.

❗ NOTE: It is not necessary to open a new pull request. ❗

More information:
https://github.com/arduino/library-registry/blob/main/README.md#if-the-problem-is-with-the-pull-request

[github-actions]

❌ ERROR: Arduino Lint found errors with https://github.com/iory/arduino-ics:

Linting library in arduino-ics
INFO: No header file found matching library name (arduino-ics.h). Best practices are for primary header filename to     
      match library name.                                                                                               
      See: https://arduino.github.io/arduino-cli/latest/library-specification/#libraryproperties-file-format            
      (Rule LS008)                                                                                                      
ERROR: Library name arduino-ics starts with "Arduino". These names are reserved for official libraries.      
       See: https://arduino.github.io/arduino-cli/latest/library-specification/#libraryproperties-file-format
       (Rule LP012)                                                                                          
WARNING: No example sketches found. Please provide examples.                                      
         See: https://arduino.github.io/arduino-cli/latest/library-specification/#library-examples
         (Rule LD004)                                                                             

Linter results for project: 1 ERRORS, 1 WARNINGS

-------------------

[github-actions]

Thanks for your interest in contributing to the Arduino Library Manager index @iory
Please resolve the error(s) mentioned in the previous comment.

After resolving the issue, trigger this check again by doing one of the following:

• Commit the required change to the branch you submitted this pull request from.
• Comment here, mentioning @ArduinoBot in the comment.

❗ NOTE: It is not necessary to open a new pull request. ❗

More information:
https://github.com/arduino/library-registry/blob/main/README.md#if-the-problem-is-with-the-pull-request

[per1234]

Hello @iory. I see you have fixed the error reported by the bot. However, Library Manager works exclusively from Git tags, so the bot won't be able to see the fix you made until you create a new release or tag in the library repository.

If you look at the repository contents at the latest tag, you can see that the version the bot is checking still has the problem:

https://github.com/iory/arduino-ics/blob/v0.0.1/library.properties#L1

name=arduino-ics

❗ Remember to update the value of the version property in the library's library.properties file as needed before making a release/tag.

Once you have done that, simply mention @ArduinoBot in a comment here to trigger it to run the automated checks again. After those are passing, your library will be automatically added to Library Manager.

If you have any questions or concerns, please let me know.

Regards, Per